How to Clean Griptape Without Grip Gum

How to Clean Griptape Without Grip Gum

Download Commodity

Download Commodity

A skateboard with dirty grip record is hard to ride and not very pretty to look at. Layers of dirt and mud tin can lessen traction and resistance, making it hard to land any tricks. Learning how to clean your ain grip tape can salve you money and your board volition stay in skillful shape for longer. It might seem like a complicated process, but it'south really quite easy.

1. i

   Purchase a soft wire brush. The bristles should be sturdy, just not abrupt enough to tear your grip tape. You can buy a proficient metal brush for a few bucks at your local hardware store, or get a specialty one from your local skate shop.

   • Pocket-sized brushes allow for precision.
   • A firm toothbrush will also work. ^[1]

2. two

   Brush the grip tape thoroughly. Outset from one end of the board and work your way to the other, going section by section. This brings deeper clay to the surface, and you lot'll be able to sweep most of it off with your hand.

   • Don't push then hard that the grip tape starts tearing.
   • Avert stripping the grit.
   • Continue going until there are no more dingy spots.
   • If there are deep stains that won't come up out, you lot might want to replace the grip birthday.

   Advertisement

3. three

   Remove leftover grime with grip gum. Near skate shops sell grip gum meant specifically for skateboards, and they're great products for cleaning. Rub at the grip tape like you would with a pencil eraser, then brush away the residue. Doing a thorough pass with grip glue will leave your lath looking brand new.

   • A prophylactic cement eraser from an art shop is a cheap alternative.

   Advertisement

1. one

   Buy a soft wire castor. Option upward a inexpensive metallic brush with potent bristles at your local hardware store, or buy one from your a skate shop.

   • Small brushes let for precision.
   • A firm toothbrush volition also work. ^[2]

2. 2

   Make full a bowl with soapy water. Longboards are thicker and more than resistant to water than shortboards, so information technology's okay to utilize liquids on them. Mix tap water with a little bit of lather to brew up the platonic skateboard cleaning concoction. You lot should just need a medium-sized bowl to wash every inch of your grip tape.

   • Add lemon for a clean olfactory property.
   • Don't submerge your longboard.
   • Window cleaner tin can also be used to clean grip tape on longboards.

3. three

   Dip your brush in the bowl and scrub your grip tape. Showtime at i terminate of the board and work your mode to the other, taking time to really dig into the messier spots. Longboards have thick grip tape and it may have a while to loosen all of the dirt.

   • Rinse your brush in the bowl whenever it gets muddied.
   • Don't permit water pool on your board. Liquids can seep into the wood and do impairment to the structure.
   • Pushing too difficult will tear the grip and strip dust from the tape.

4. four

   Dry the grip and board with a microfiber cloth. Lay the cloth across the superlative of your board and pat to soak upwardly wet. So fold the textile and press against the grip tape until the tape is mostly dry.

   • Make sure the bottom wood is also dry out.
   • Don't use paper towels, as that will break autonomously and make a huge mess.
   • Grip record might starting time to peel if it's not dried thoroughly.

5. 5

   Allow your board to dry for at least iii hours. Riding a wet or clammy skateboard can take negative effects. If, past run a risk, water got into the woods of your longboard, riding it might bend or warp the whole thing. Then it might not roll straight. Just exist safe and permit your board dry completely before using it.

6. half dozen

   Utilise grip gum if there is still residue. Rub it across the grip tape like you lot would with a regular pencil eraser, and then brush away the residue left backside. Finish by your local skate shop to purchase some grip gum.

   • Yous can likewise use a cheap rubber cement eraser from an fine art shop.

   Advertisement

Ask a Question

200 characters left

Include your electronic mail accost to get a message when this question is answered.

Submit

Advertisement

• Removing the wheels might make your board easier to clean. ^[three]

• To proceed your grip tape in expert condition, make sure your shoes are every bit clean as possible.

• Grip tape should be removed and replaced on boards with extremely worn dust or torn edges.

Thanks for submitting a tip for review!

Ad

• Don't use water or window cleaner on shortboards.

Advertisement

Things You'll Need

• Grip mucilage or rubber cement eraser
• Soft wire brush

• Bowl or bucket
• H2o
• Soft wire brush
• Microfiber fabric
• Grip mucilage or rubber cement eraser

About This Commodity

Article Summary 10

To make clean the grip record on a shortboard, use a soft wire castor with sturdy beard to get rid of any dirt. Starting time at ane end of your lath and work your way downward. Avoid pressing downward too hard and then you don't adventure rubbing off the grip. If there's any leftover grime on your grip tape, rub grip gum beyond it. Yous can as well remove the wheels from your board and lay it on a apartment surface to make the process easier. To clean the grip record on a longboard, utilize the same process, but dip your brush in soapy h2o to help break downwards the clay, since longboards are more h2o-resistant than curt boards. Subsequently cleaning information technology, allow information technology dry for for at least 3 hours, since riding information technology while it'southward clammy tin can be dangerous. For more than tips, including when to replace the grip tape on your skateboard, read on!

Did this summary help you?

Cheers to all authors for creating a page that has been read 85,259 times.

Did this article assistance y'all?

How to Clean Griptape Without Grip Gum

Posted by: edwardexievess.blogspot.com